104 product lines across 15 families. This is what we source every week, not a live stock list. If your part isn't here, send the OEM number and we'll find it.
Complete triplex mud pumps and skid, diesel or electric pump packages for land and offshore rigs.
Compact triplex pump for workover, shallow wells and small land rigs.
| Power | 500 HP |
|---|---|
| Type | Single-acting triplex |
| Standard | API 7K |
Mid-size triplex for land rigs drilling to intermediate depths.
| Power | 800 HP |
|---|---|
| Type | Single-acting triplex |
| Standard | API 7K |
Workhorse triplex for land drilling programs.
| Power | 1,000 HP |
|---|---|
| Type | Single-acting triplex |
| Standard | API 7K |
Liners, pistons, valves, seats, inserts, springs and seals, the parts you replace every well.
Zirconia-sleeved liners for the longest service life in abrasive mud.
| Fits | F-series, PZ-series, 3NB, Emsco FB, Gardner Denver |
|---|---|
| Sleeve | Zirconia ceramic |
| Sizes | 4-1/2 to 7-1/2 in |
Double-metal liners with a hardened chrome-iron bore.
| Fits | All major triplex and duplex pumps |
|---|---|
| Bore | Hi-chrome, 62+ HRC |
| Sizes | Full bore range |
One-piece bonded pistons for water- and oil-based mud.
| Elastomer | Urethane, high-temp urethane |
|---|---|
| Fits | All major triplex pumps |
Modules, valve covers, retainers, wear plates and high-pressure conversion kits.
Forged alloy-steel modules for 5,000 and 7,500 psi pumps.
| Material | Forged alloy steel |
|---|---|
| Rating | 5,000 or 7,500 psi |
| Docs | MTRs on request |
Covers, retainer nuts, cylinder heads and threaded rings.
| Parts | Valve covers, retainers, heads, rings |
|---|
Wear plates, liner clamps, cages and retention hardware.
| Parts | Wear plates, clamps, cages, studs |
|---|
Crankshafts, pinion shafts, bull gears, crossheads and rods for mud pump power ends.
Forged and machined crankshafts for triplex power ends.
| Fits | F-series, 3NB, PZ, Emsco and Ideco-pattern pumps |
|---|---|
| Supply | New, OEM or aftermarket |
Pinion shafts with gear and bearing journals.
| Fits | F-series, 3NB, PZ, Emsco and Ideco-pattern pumps |
|---|---|
| Supply | New, OEM or aftermarket |
Herringbone bull gears and gear rings.
| Fits | F-series, 3NB, PZ, Emsco and Ideco-pattern pumps |
|---|---|
| Supply | New, OEM or aftermarket |
Pulsation dampeners, relief valves, gauges, manifolds, liner wash pumps and service tools.
Discharge pulsation dampeners and bladders.
| Rating | 5,000 / 7,500 psi |
|---|---|
| Also | Bladders, gauges, charging kits |
Shear-pin and reset relief valves for pump discharge.
| Rating | Up to 7,500 psi |
|---|---|
| Also | Shear pins |
Resettable safety valves for pump protection.
| Use | Mud pump discharge |
|---|
Frac pump fluid ends and expendables, plus high-pressure unions, pup joints, swivels and valves.
High-pressure fluid ends for frac and well-service pumps.
| Rating | Up to 15,000 psi |
|---|---|
| Type | Triplex and quintuplex |
Plungers, packing, valves and seats for frac pumps.
| Parts | Plungers, packing, valves, seats, springs |
|---|
Quintuplex pumps for fracturing fleets.
| Power | 2,500 to 5,000 HP |
|---|
Mud and manifold gate valves, butterfly valves and drill pipe float valves.
Rising-stem mud gate valves for standpipe and manifold service.
| Rating | 5,000 psi |
|---|---|
| Sizes | 2 to 6 in |
| Ends | Threaded, butt-weld, flanged |
High-pressure mud gate valves for 7,500 psi systems.
| Rating | 7,500 psi |
|---|---|
| Sizes | 2 to 5 in |
Gates, seats, seals and stems for mud gate valve rebuilds.
| Fits | Demco-style 5,000 and 7,500 psi |
|---|
Elevators, spiders, slips, tongs, safety clamps, dies, inserts and bowls.
Center- and side-door elevators for drill pipe.
| Capacity | 100 to 500 tons |
|---|---|
| Styles | G, SLX, TA-style |
Elevators for tubing and casing, including single-joint.
| Styles | YT, YC, single-joint |
|---|
Hinged casing spiders and tubing spiders.
| Capacity | Up to 250 tons |
|---|---|
| Styles | C, CHD, E-style |
Power tongs, spinners, catheads, winches, swivels, washpipe and hoisting equipment.
Tubing, casing and drill pipe power tongs.
| Range | 2-3/8 to 20 in |
|---|---|
| Also | Back-up tongs |
Pneumatic and hydraulic spinners for faster connections.
| Drive | Air or hydraulic |
|---|
Wear parts and spares for iron roughnecks.
| Parts | Dies, jaws, seals, cylinders |
|---|
BOPs and spares, control units, choke and kill manifolds and wellhead equipment.
Single and double ram BOPs, complete stacks.
| Rating | 2,000 to 15,000 psi |
|---|---|
| Standard | API 16A |
Replacement packing units for annular preventers.
| Elastomer | Natural rubber, nitrile |
|---|
Ram blocks, packers, top seals and bonnet seals.
| Fits | Most U-type and annular BOPs |
|---|
Shale shakers and screens, desanders, desilters, centrifuges, degassers and pumps.
Linear-motion shale shakers for primary solids removal.
| Motion | Linear / balanced elliptical |
|---|
Replacement composite and steel-frame screens.
| Fits | Most major shaker models |
|---|---|
| API | API RP 13C mesh |
Hydrocyclone units for fine solids removal.
| Cones | 10 in desander, 4 in desilter |
|---|
PDC, tricone and core bits in API sizes for every formation.
Steel-tooth roller cone bits for soft formations.
| IADC | 1-1-1 to 3-4-7 |
|---|
Insert bits with rubber- or metal-sealed bearings.
| IADC | 4-1-7 to 8-3-7 |
|---|
Reciprocating and rotary screw air compressors, parts and lubricants for rig and field service.
Single- and two-stage piston compressors for intermittent rig and shop air.
| Power | 2 to 30 HP |
|---|---|
| Brands | Gardner Denver R / PL / A-series or equivalent |
Oil-lubricated screw compressors for continuous 24/7 duty.
| Duty | Continuous |
|---|---|
| Drive | Electric, fixed or variable speed |
Filters, valves, gaskets, belts and overhaul kits.
| Fits | Reciprocating and rotary screw units |
|---|
Wire rope, hoses, filters, thread compounds and other everyday rig supplies.
Drill line, sand line and slings, shipped with your parts order.
| Use | Everyday rig consumables |
|---|---|
| Saves | Consolidated with parts orders |
Rotary, vibrator, cementing and hydraulic hoses.
| Standard | API 7K hoses |
|---|
Engine, hydraulic and air filters for rig equipment.
| Fits | Rig engines, HPUs, compressors |
|---|
Hard-to-find spares for older U.S.-built rigs, sourced from qualified surplus.
Hard-to-find parts for older U.S.-built rigs.
| Rigs | Ideco, Cardwell, Skytop, EMSCO, National |
|---|---|
| Source | U.S. surplus, condition checked |
Filters, gaskets and overhaul kits for rig engines and gensets.
| Parts | Filters, gaskets, overhaul kits |
|---|---|
| Units | Rig engines and gensets |
